ACCESS PANELS - 6000 SERIES
Circular Access Panels
6000 SERIES ACCESS PANELS SUMMARY
The PROFAB 6000 series range of steel lockable access panels provides access into jointless plaster/plasterboard ceilings, where access to mechanical and electrical services is required
COMPOSITION & MANUFACTURE
The metal frame holds a flush metal faced door (MD) or a plasterboard lined (PD) door through a bayonet lock retaining system. The bayonet lock retaining system allows the door to be removed during installation or if damage occurs. Panel frames are manufactured either as fully concealed (BF) or alternatively, manufactured for retrofitting where the 25mm picture frame is visible (PF). Panels with simulated drywall beaded frames (BF) are supplied powder coated white primer all over as standard for decoration on site to match the adjacent finish. Panels with visible picture frame (PF) are supplied powder coated semi-gloss white as standard.
Frame: 1.2mm thick aluminium incorporating a simulated edge bead profile (BF) finished white powder coated primer.
Door: Flush metal 1.2mm thick aluminium (MD) finished etch white powder coated primer.
Frame: 1.2mm thick aluminium incorporating a 25mm visible picture frame (PF) finished white powder coated semi-gloss. Door: Flush metal 1.2mm thick aluminium finished white powder coated semi-gloss.
Frame: 1.2mm thick electro galvanised steel incorporating a simulated edge bead profile (BF) finished white powder coated primer.
Door:9.5mm plasterboard lined 1.2mm thick electro galvanised steel finished white powder coat primer.
TYPICAL SIZES & WEIGHTS
KEY POINTS TO NOTE
1. Diameter dimensions is outside rear frame.
2. Overall frame depth is 35mm.
3. Structural opening required for installation is (diameter+5).
4. Clear available access when installed, with door in the open position is (diameter –40).
“I requested a sample access panel for a current project and this was delivered to my office within 24 hours. Cannot fault the service.”
“Always quick to respond to enquiries, have used a few times now on different projects, will definitely use again.
Very easy to use and install products..”
Access panel type 6000/BF Size 600mm diameter single door unit supplied by Profab Access Ltd.
The 6000 series is an entry-level access panel designed to provide a simple, economic means of accessing building services, so only limited modificatiuons are available with this product. However, Profab’s manufacturing flexibility provides for alternative sizes, locks and paint colours. Discussions with Profab should take place at the earliest opportunity if specification changes are being considered.
Apertures formed in dry lined ceilings should be adequately supported to take the additional weight and operating forces exerted during operation. Typical fixing details are shown on this data sheet.
The panel is fitted with a concealed bayonet retaining mechanism operated by rotating the door within the frame.
Available through a network of distributors. Refer to Profab for guidance.
If there is any doubt about the information given in this data sheet or the intended product usage, then Profab should be consulted. We are only too pleased to advise on the use of our products. Technical representation is available at all stages of a project. In house manufacturing enables us to offer full flexibility in product design for projects that need to meet specific design criteria.
QUALITY & DEVELOPMENT
Profab access panels are manufactured under strictly controlled quality systems and so we reserve the right to amend any of our published information and specification.
6000 SERIES DOWNLOADS
BS EN 1634-1:2014 – Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware. (Equivalent to BS 476-22)
BS 476-31.1 or EN 1634-3 - Fire tests on building materials and structures. Methods for measuring smoke penetration through doorset’s and shutter assemblies. Method of measurement under ambient temperature conditions
BS 9999:2017 - Fire safety in the design, management and use of buildings. Code of practice (Smoke control)
BS EN 12207:2016 or BS EN 1026:2016 - Windows and doors. Air permeability. Classification
BS EN ISO 140-3:1995 & BS EN ISO 717-1:1997 – Acoustic Testing