LAUNDRY CHUTE DOORS
LAUNDRY CHUTE DOORS SUMMARY
The PROFAB Chute series range of steel lockable access panels provides access into tubular laundry chute systems, where an ascetically pleasing finish is required.
COMPOSITION & MANUFACTURE
The 1.2mm thick, electro-galvanised mild steel frame holds a flush 1.2mm thick, electro-galvanised mild steel flush faced door (MD) through a simple concealed flush hinge device. The door is held closed with a flush, lockable, stainless steel pull handle and opens towards the user. Doors are removable if damage occurs or during installation. Panels are powder coat finished all over and can be painted over to match teh surrounding wall structure.
Frame: 1.2mm thick, electro-galvanised mild steel factory welded to specified size and finished white powder coated primer.
1.2mm thick, electro-galvanised mild steel flush faced tray with glass reinforced gypsum in-fill, finished white powder coated primer. Locks:
Flush, lockable, stainless steel pull handle and latch supplied with hexagon drive key.
|Dim X||Dim Y|
All panels are single door.
Chute series panels are available to suit laundry chute tube sizes from 200mm to a maximum of 600mm.
KEY POINTS TO NOTE
1. X and Y dimensions are chute tube sizes.
“I requested a sample access panel for a current project and this was delivered to my office within 24 hours. Cannot fault the service.”
“Always quick to respond to enquiries, have used a few times now on different projects, will definitely use again.
Very easy to use and install products..”
APPLICATIONS & USES
All standard panels are for internal use and only in areas
of normal humidity. Factory supplied standard finish
white matt powder coated, other colours & finishes are
available upon request.
INSTALLATION Apertures formed in dry lined walls and ceilings should be suitably formed and adequately supported to take the additional weight and operating forces exerted during operation. Typical fixing details are shown on this data sheet.
OPERATION The panel is fitted with a concealed budget lock, operated with a supplied square drive key through a round keyhole in the door face following removal of the white plastic cap (Additional keys and caps are available from PROFAB).
SUPPLY Available through a network of distributors.
TECHNICAL SERVICES ADVISORY If there is any doubt about the information given in this data sheet or the intended product usage, then PROFAB should be consulted. We are only too pleased to advise on the use of our products. Technical representation is available at all stages of a project. In-house manufacturing enables us to offer full flexibility in product design for projects that need to meet specific design criteria.
QUALITY & DEVELOPMENT PROFAB access panels are manufactured under strictly controlled quality systems and so we reserve the right to amend any of our published information and specifications deemed necessary as a part of our continuous product development and improvement policy, without prior notice.
Performance (NFR/1FR) 0/60/ minutes fire rated. BS EN 1634-1: 2000 30dB acoustic shielded. BS EN ISO 140-3: 1995, BS 2750: Part 3: 1995 Airtight to Part L. BS EN 12207: 2000 & BS EN 1026:2000 CNC manufactered to ISO 9001:2009.
LAUNDRY CHUTE DOWNLOADS
BS EN 1634-1:2014 – Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware. (Equivalent to BS 476-22)
BS 476-31.1 or EN 1634-3 - Fire tests on building materials and structures. Methods for measuring smoke penetration through doorset’s and shutter assemblies. Method of measurement under ambient temperature conditions
BS 9999:2017 - Fire safety in the design, management and use of buildings. Code of practice (Smoke control)
BS EN 12207:2016 or BS EN 1026:2016 - Windows and doors. Air permeability. Classification
BS EN ISO 140-3:1995 & BS EN ISO 717-1:1997 – Acoustic Testing